VEHICLE SEARCH
 
 
Sale!
A 12V dryer kit is displayed, including a digital control panel, wires, heatsink, white brackets, rods, screwdriver, and a JMSCHIP.com sticker, with “12v Dryer Version No PS” text at the bottom.
  1. A 12V dryer kit is displayed, including a digital control panel, wires, heatsink, white brackets, rods, screwdriver, and a JMSCHIP.com sticker, with “12v Dryer Version No PS” text at the bottom.
  2. Two rectangular electronic devices with large heat sinks, one blue and one green, each with red wires attached, are placed on a textured gray surface.
  3. Two electronic modules labeled JMS CHIP sit side by side on a gray surface. The left module is blue and labeled 12V 06/05/23, and the right module is green and labeled 24V 06/05/23. Both have red wires attached.
  4. 3D-rendered image of a green and black cylindrical device with fins, black and white rods extending from the back, and a curved base, shown on a white gradient background.
  5. A dual-extruder 3D printer with two filament spools, blue and yellow, mounted on top. The printer is actively printing a white object on the heated bed, with a touchscreen control panel on the right.
  6. A dual-extruder 3D printer prints two dragon models, one orange and one blue, with two spools of filament mounted on top and a digital control panel at the front labeled TRONXY.
  7. 3D rendering of a beige, rectangular frame with a clear center, supported by two angled legs that end in U-shaped slots, set against a plain white background.
  8. A close-up of a Creality 3D printer on a desk, showing its control panel with a digital display reading 28.9, wires, and the print bed ready for use.
  9. 3D-rendered image of a device labeled TEMPERATURE CONTROLLER with a black display panel, green vents, and blue and yellow mechanical components mounted on top.
  10. Exploded view of a mechanical assembly with five components: two yellow brackets, a white rectangular frame with cut-outs, a white base plate, and a tilted white screen or panel, all separated and floating.
  11. A digital temperature controller displays 47.8 in red and 53 in blue, with a green metal heatsink mounted above the device. Black buttons labeled SET and Restart are visible on the front panel.
  12. Open electronic device showing a display panel connected by red and black wires to a circuit board with a transformer, capacitors, and heatsinks, next to a partially open plastic casing.
  13. 3D-rendered diagram of a white, cubic device with green slits, a black front panel displaying red text, and internal blue and yellow components visible through an open top cover.
  14. Two colored metal objects, one blue and one green, with red wires attached, rest on a gray surface near a yellow measuring tape showing inches for scale.
  15. A wiring diagram showing a temperature sensor, control board, relay module, switch, and transformer connected with red, black, green, and blue lines; labeled as 12V wiring diagram - with dedicated power supply.
  16. Wiring diagram showing a temperature sensor and relay controller connected to a 24V printer power supply, with color-coded wires and labeled terminals for clear wiring guidance.
  17. A close-up of a 3D printer setup on a wooden surface, showing two spools of filament, one on a stand feeding filament into the printer, with the printer’s control panel displaying numbers.
  18. A black filament dryer with a digital display shows temperature and humidity. Next to it, a green spool of eSUN 3D printing filament rests on a white stand. The setup is on a workbench with pegboard and stickers in the background.
  19. Black 3D printer filament dryer with a spool of black filament loaded, sitting on a white desk near a pegboard wall and a connected power cable.

3D Printer Filament Dryer - 12V - Blue - NO Power Supply

Original price was: $159.99.Current price is: $129.99.

Requires the use of your own external 12-13.5v DC power supply.

Filament dryer is designed to work with FDM/FFF 3D printers.

Quickly remove moisture from the filament in real time

Designed to work with one or two extruders simultaneously

SKU: JMS-U3DPFD12B Categories: JMS 3D Printing

***This product version requires the use of your own external 12-13.5v DC power supply.***

This filament dryer is designed to work with FDM/FFF 3D printers.

It is an in-line device, that will remove moisture from the filament in real time, before the consumable reaches and passes through the extruder.  The elimination of moisture in the filament will significantly improve your print quality.

Our filament dryer is designed to work with one or two extruders simultaneously.

Compatible with Ø1.75mm and Ø2.85mm filament and most filament types (see the temperature chart).

Kit Contents:

• (1x) 12v / 7W Filament Dryer Extrusion and Heating Element (color: blue) 

• (1x)  12V Electronic Temperature Controller 

• (2x)  Carbon Fiber Tube 

• (1x)  Generic 3D Printed Console 

• 2ft 20AWG Wire Red 

• 2ft 20AWG Wire Black 

• Quick Start Guide 

• Flat Blade Screwdriver 

• Sticker

Specifications:

• Heating power: 7W

• Input voltage: 12V – 13.5V

• Current draw: 0.58A@12V

• Temperature controller range: -50°C to 120°C

• Max temperature in filament channels: 95°C @ 12.25V

Filament Dryer Test Results: https://jmschip.com/content/3DPrinterDryer/JMS-3DPFD_Filament_Dryer_Test_Results.pdf

Filament Dryer Test Results Video: https://youtu.be/-0wK8XFs0NQ

Product Instructions: https://jmschip.com/content/3DPrinterDryer/JMS-3DPFD12_12VJMS_FilamentDryermanual_NO-PS.pdf

Temperature Chart: https://jmschip.com/content/3DPrinterDryer/Temp_chart-various-consumables.pdf

Temperature Controller Instructions: https://jmschip.com/content/3DPrinterDryer/W3230_temperature_controller_manual.pdf